GitOps driven Openhab in k3s
After building out my cloud@home environment (detailed in my previous article), I decided to take the next logical step: replacing my OpenHABian setup with a […]
Continue reading »Category: Programming
Cloud at home with minimum toil – PXE / Proxmox / Saltstack / k3s
My home lab was 7 years old and it was time to replace it. It was based on five Odroid HC1 nodes and 1 Odroid […]
Continue reading »
Rflink with mqtt V2 : enhanced and minimized
Some years ago, I built a custom shield for an arduino mega running Rflink. The purpose was to provide Rflink MQTT messages over ethernet. I […]
Continue reading »
GamOdroid C0 updated with fbdev retroarch
I recently finished the V3.0 of my custom retroarch build distribution for oddroid C1 : https://github.com/jit06/retroarch_fbdev_c1. Amongst other things, the are 2 main features that pushed […]
Continue reading »
DIY volumio driven audiophile DAC and CD player
The Raspberry pi has some very high quality DAC such as the Pecan Pi. But regarding integration, even if there are existing cases, I was […]
Continue reading »
Custom Arduino Shield that provides MQTT to Rflink
Since a couple of years, I used to use a french home automation box : the Zibase. In its time, it was the only one […]
Continue reading »
Saltstack : state for monitorix + ASD to monitor docker (Archlinux)
As I’m using monitorix to monitor all my servers, I naturally did a dedicated state for saltstack. I also coupled this with a state to […]
Continue reading »
Arduino : HTTP driven power switches and UART to telnet gateway
As explained in a previous post, I made a small custom ARM servers bay with 3 cubieboards. Until now, switching power or using UART connection […]
Continue reading »
Linux : Monitoring And supervision with Zabbix
Here is some notes of my own Zabbix monitoring system installation (debian based). It has been done since a while now, but I never took the […]
Continue reading »
Project : Openhab binding for Zibase
As an home automation passionate, I have some parts of my home which are automated (heating, lights, roller shutter,…). I’m using a French box from […]
Continue reading »